Specifications:
- Rated Voltage: 11.1V (3S)
- Fully-charge Voltage: 12.6V
- Capacity: 5200mAh (5.2 Ampere Hour)
- Maximum discharge rate: 40C
- Terminated with Dean-T terminal, with ~ 9cm length
- Terminated with 4-pin JST-PH as balance connector, with AWG22 cable size, length ~ 6cm
- Able to use for most of the 12V controllers, motors ,or any other appliances
- Must be charged with designated LiPo Battery Charger
- Recommended Charging Rate: 0.5 – 1.0A
- Dimension: 138mm x 43mm x 30mm (Not including cables)
Note:
If it is not used for a long time, please maintain the voltage at 11.4V, the recommended storage voltage.
Cautions:
- Don’t over-charge, or over-discharge batteries.
- Don’t put it beside the high-temperature condition.
- Don’t throw it into the fire.
- Don’t throw it into the water.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.