OSC pulse PWM signal generate module StepStick stepper motor driver controller speed frequency direction control
Product Introduction:
- This module is a pulse generation module.
- Generate signals for stepper driver.
- To control the stepper motor, it must also be equipped with a driver.
- This simple controller + step driver + step motor + DC power supply can form a simple control platform.
- The controller has three frequency signals: high 5.4k-160khz, medium 540-16.6khz, and low 80-2.4khz, which can be selected by jumping needle.
- It can generate a pulse signal, PWM signal, and jumper.
- Frequency measurement: it can measure pul and common negative (or common positive) ports.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.