Main Features:
- CPU is ATMEGA328P-AU, 8bit 20MHZ, 5V logic level, stronger anti-interference type.
- Support Laser and CNC.
- Support writing machine.
- Support MKS TFT24/32/35 connected by AUX-1, and TFT_CNC firmware support Laser mode and CNC mode.
- Support grbl firmware.
- Support update firmware by USB.
- Support upload firmware hex file by Xloader.
Download
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.